5
4
QUICK GUIDE
PANDORA WATCH2
• Shockproof housing
• Shockproof glass
• IP rating - IP67
• Color display 1.34 (320х300)
• 256 MB RAM
• Bluetooth 5.0 interface
• Li-Po Battery, 3.7V, 250mAh
• GPS/GLONASS-receiver
• 3D-accelerometer
• Sealed micro-USB connector
• Sound indicator
• Vibro-indicator
• 5 Control buttons
1
2
3
5
4
M
icr
o-USB
Display
BUTTONS
NAVIGATION
FUNCTIONS
1
Select
TURN ON THE WATCH
– press and hold the button for 3 seconds.
NOTIFICATIONS
– briefly press the button, the second press will cause notification switching.
UPDATE SOFTWARE
– hold the button and connect the watch to a PC via a USB-cable while holding the button (See
the “Update firmware” section).
2
Back
CHECK VEHICLE STATE
– briefly press the button. To update vehicle state information, go to the CHECK menu and press
and hold the
5
button, release the button when the indicator loads to the middle of the progress bar.
3
ARMING/DISARMING
– press and hold the button, release the button when the indicator loads to the middle of the
progress bar.
4
Up
REMOTE ENGINE START
– press and hold the button, release the button when the indicator loads to the middle of the
progress bar.
5
Down
MENU
– briefly press the button.
