Pluto User Manual v1.38
Page 46 of 66
The CDL colour look can be set directly on the Pluto off camera, without using
the GUI. The CDL look can then be stored in a slot, or logged for uploading into
an EDL or ALE file. The following steps describe this process.
Step 1: Plug in the Kensington Trackball Mouse into the USB port of the Pluto.
Step 2: Press the
Left Hand mouse button
Left Hand mouse button. In the Top left hand corner of the SDI
output A, the current status of the CDL control is shown. By Default the status is
"
CDL is Off
".
Step 3: Press and hold the
Left Hand mouse button
Left Hand mouse button, until the status changes. A
single press of the left button will then toggle through the following controls.
The Trackball gives colour differential control and the Control Ring gives a master
level control for the following:
Lift
- Colour and level control in the low lights.
Gamma
- Colour and gamma curve control
Gain
- Colour and level control in the highlights
Saturation
- The control ring controls Chroma saturation (trackball not used).
Pandora Technology
United Kingdom
www.pandora-int.com
October 2013
