11
10
U S E R A N D I N S TA L L AT I O N MA N UA L
PA N D O R A M I N I M OTO
SYSTEM FUNCTIONS AND MODES
Security mode
The system confirms arming with
1х
sound
and
1х
light
signals. When the system is armed,
the system monitors security zones with separated warning and alarm level of triggering:
• Warning mode - this mode activates when there is a slight impact on the shock sensor or additional
senor. It is accompanied with
1х
light
and
3х
sound
signals;
• Alarm mode - this mode activates when a sensor or one of the security zones is triggered. It is
30
sec.
light
and
30 sec.
sound
signals. The alarm signals can be cancelled by an arming or
disarming command.
If one of the security zones is triggered the system:
• records this event in it’s non-volatile memory;
• activates the alarm or warning mode;
• informs an owner by all available means;
• blocks the engine (in accordance with the settings and connections).
• If one of the security zones is opened at the moment of arming, the system will produce
4х
sound
and
4х
light
warning signals.
If one of the security zones fails, the system will forcibly turn off this zone. If a switch triggers
more than 9 times in a row, it will be disabled until the next arming. The shock/tilt/motion sensor is
temporarily deactivated (15 sec.) if it has been triggered more than 3 times in a row.
The system confirms disarming with
2х
sound
and
2х
light
signals. The system deactivates
engine blocking (if the Immobiliser function and additional blocking are not used). If there were alarm
events (except warning level) during the armed period, the system will produce
4х
sound
and
4х
light
warning signals. The system continues to display all zones when it is disarmed, but the
information is not saved in the memory.
!
f
Or
EmErgENcy
disarmiNg
sEE
«c
ONTrOl
ThE
sysTEm
iN
casE
Of
EmErgENcy
». E
NgiNE
blOckiNg
whilE
driviNg
pOsEs
aN
iNcrEasEd
risk
. w
E
sTrONgly
rEcOmmENd
ThaT
yOu
bE
parTicularly
carEful
whEN
usiNg
This
mEThOd
Of
blOckiNg
.
Security zones
• Outside temperature (status)
• Engine temperature (status)*
• Voltage of the on-board circuits (status)
• Additional sensor (security zone - alarm and warning level)*
• Shock sensor (security zone – alarm and warning level)
• Tilt sensor (security zone – alarm level)
• Motion sensor (security zone – alarm level)
• Turning ignition on (status, security zone – alarm level)
• Pressing brake (status, security zone – alarm level)
• Pressing clutch (status, security zone – alarm level)
• Opening a trunk (status, security zone – alarm level)
!
c
ONTrOl
Of
ThE
sTaTusEs
aNd
sEcuriTy
zONEs
dEpENds
Of
ThE
sysTEm
sETTiNgs
aNd
cONNEcTiONs
.
* O
pTiON
.
Owner authorization devices and functions
Authorization devices
Authorization devices are Bluetooth devices paired with the system (radio tags, remote controls,
mobile phone with the app, band). The devices are used to recognize an owner in the radio coverage
zone of the base unit, to arm/disarm the system (Hands Free mode) and to implement Immobiliser or
Anti-Hi-Jack functions.
Arming/Disarming by clutch lever
You can arm/disarm the system by a clutch lever if an authorization device is in the coverage zone.
!
T
his
mOdE
is
ENablEd
by
dEfaulT
. i
T
is
rEquirEd
TO
makE
addiTiONal
cONNEcTiONs
fOr
This
mOdE
Hands Free arming/disarming
This mode is used for automatic arming/disarming
when an owner with an authorization device is
distancing or approaching a vehicle.
!
T
his
mOdE
is
disablEd
by
dEfaulT
. T
hE
cONfiguraTiON
shOuld
bE
madE
by
a
qualifiEd
TEchNiciaN
.