26
Pandora Immo
Wiring description
№
Assignation
1
GND
2
COM relay
3
Ignition
4
Code channel
5
+12V
6
N.C. relay
7
N.O. relay
8
Driver’s door input
9
Status output
Wire 1 (Ground)
This wire should be connected to the car body in a
grounding spot. The wire should be connected FIRST during installation.
Wires 2, 6, 7 (COM, N.C., N.O. relays)
Contacts of built-in electromagnetic
relay are used to perform blocking. Normally closed group (COM and N.C.)
is used for the circuit being blocked. Normally open group (COM and N.O.)
is used for blocking with bypass grafting or for additional relay switching.
Switching current must be no more than 10A permanently and no more than
20A (for switching circuits without inductive load component).
Wire 3 (Ignition)
This wire connects to the negative output of beeper
that is located to be heard by driver’s ear. Positive output of beeper connects
to the ignition switch or to appropriate wire where 12V voltage appears when
ignition is switched on and doesn’t disappear until the moment ignition is
