7
The module will be calibrated for the current protection after the
power is connected and it is activated by the window regulator buttons
(short press) or by control pulses.
WARNING! WHEN CONNECTING THIS MODULE,
MAKE SURE THAT ELECTRIC MOTOR OF WINDOW
REGULATOR ARE CONNECTED TO ‘GROUND’
(WHEN CONTROL BUTTONS ARE RELEASED). THIS
IS HOW WINDERS ARE CONTROLLED IN THE MOST
OF MODERN CARS.
Digital output (‘Gray’) is intended to control additional modules of
window regulators if it is required to close more windows or to connect
other devices. A negative impulse of 500 ms is formed on the wire after
the second output completes its work.
The module has ‘Status’ output (‘Pink’) with negative potential while
this module is active. It can be used, for example, to temporary deac-
tivate the shock (volume) sensor until all windows, doors and hatches
are closed.
Digital input (AUX) («Gray/Red») is intended to control the module
by a code digital signal from the other devices: Pandora car alarm sys-
tem, another DWM-210 module.
MODULE INSTALLATION
It should be installed in the car interior in place that is protected from
moisture and dust. When connecting, pay attention to the quality of