
33
32
User manual
Car service and security system Pandora DXL 397O
Vibration settings of the remote
To enter remote’s vibration settings, select
VIBRO
option in the
SETTINGS
menu using navigation
buttons (4 and 6) and confirm it with button 5 short press:
SETTINGS > VIBRO
ON
OFF
SAVE
switch on vibration
switch off vibration
save settings
Full path to this settings menu:
MainMenu>>11.SETTINGS>>2.VIBRO
LCD backlight brightness settings of the remote
To enter remote’s LCD backlight brightness settings, select
BACKLIGHT
option in the
SETTINGS
menu using navigation buttons (4 and 6) and confirm it with button 5 short press:
25
adjustment bar for the brightness of the LCD
save settings
enable automatic brightness adjustment
SETTINGS > BACKLIGHT
MAX BRIGHTNESS
SAVE
AUTOCONTROL
To enter and exit adjustment bar use button 5, adjust parameters on the bars using buttons 4 (lower
brightness) and 6 (raise brightness). Brightness can be adjusted between 0 (disable backlight) and 50
(highest brightness).
Full path to this settings menu:
MainMenu>>11.SETTINGS>>3.BACKLIGHT
Checking the number of recorded remotes
Number of recorded remotes and radio tags can be checked every time the ignition is switched
on when disarmed. Number of orange and green LED flashes will indicate number of remotes and
tags recorded correspondingly.
Number of recorded remotes and radio tags can also be checked by taking off and putting back
on battery terminal. The system will sound a set of signals, corresponding to the number of recorded
remotes.
Replacing a battery in the remote
If high quality batteries are used, service-security system remote can function up to 6 month without
needing a replacement. Battery needs to be replaced, if the remote is not turning on or the icon
has only one bar left and starts flashing. To replace the battery:
• move battery cover in the direction shown;
• take the battery out and place a new AAA
battery on its place taking notice of the polarity;
• the remote is ready for use (switch it on by
pressing and holding
for 3 seconds).
It is recommended to have a spare AAA battery in the car.