Page 4
Hyundai Tucson NX4 2020-...
SECURITY SYSTEM SETTINGS
Name
Item
Setting
Note
I. MAIN
Setting of the warning level of the shock sensor
1.1.1
40
Test the sensitivity after
installation. Adjust if necessary
Setting of the alarm level of the shock sensor
1.1.2
30
Setting of the alarm level of the motion sensor
1.1.3
30
Setting of the alarm level of the tilt sensor
1.1.4
30
Algorithm of processing data from accelerometer
1.1.12
Algorithm F
Additional closing impulse after the trunk is closed while armed
1.5.10
Enable
For proper operation of trunk
opening function from Pandora
system
Central lock control in Slave mode only when the engine is started
1.5.14(15)
Enable
For the cars with Start/Stop
button only
Radio tag RSSI level
1.8(9).5
120% (max)
Radio tag hysteresis
1.8(9).6
5%
II. AUT
OMA
TIC ST
AR
T
Transmission type
2.1.2
Automatic/Manual
(AT/MT)
In accordance with the
transmission type
Stop engine at disarming
2.1.14
Enable
For the cars with Start/Stop
button
Stop engine when the tag is detected
2.1.15
Enable
For the cars with the regular key
& alarm system equipped with
the tag & Slave mode using
Time between engine shutdown and switching off ACC
2.1.18
1 sec.
Car with START/STOP button
2.2.1
Disable
Keyless bypass option
2.3.3
Bypass of KIA, HYUNDAI,
configuration with a Start/
Stop button and a regular
key (new version of the
immobiliser)
III. NPUTS / OUTPUTS
Inputs settings
3.1
Assing the inputs according to the wiring diagram.
All other
inputs should be DISABLED.
Outputs settings
3.2
Assing the outputs according to wiring diagram and selected
channels.
All other outputs should be DISABLED.
V. C
AN
Front hood limit switch
5.2.1
Enable
Ignition
5.2.6
Disable
If remote start option is used
Valet button
5.2.9
Disable
Central lock control
5.3.1
Enable
Turn lights control
5.3.3
Enable
Control over trunk lock
5.3.4
Enable
Control over vehicle security system
5.3.5
Enable
«Comfort» function
5.3.6
Enable
Command after automatic engine stop
5.3.7
Enable
Slave mode when arming factory alarm
5.4.1
Enable
Slave mode when disarming factory alarm
5.4.2
Enable
Slave mode when the trunk is opening
5.4.3
Enable
VII. GPS
GPS anchor
7.1.3
Disable