Pando PI-3110, Installation Manual

Page: 166 / 184

16. SPECIFIC FOR 3210-3211
Troubleshooting for zones 1 and 2
PROBLEM POSSIBLE CAUSES WHAT TO
DO
E1,E2,E7,C1 Temperature sensor failure Contact the supplier.
E3,E4
allo of the temperature sensor of the
IGBT.
Contact the supplier.
EU
Failure of the connection between the
display and the main board
Contact the supplier.
EL,EH
Abnormal supply voltage
Check if the power supply is
normal. Switch on after the
is normal.
C3
Temperature sensor of the glass
ceramic hob Is high
C2
IGBT temperature sensor
It is high
Please restart after the induction hob
cools down.
Troubleshooting for zones 3 and 4
Fault
code
Problem Solution
Self-Recovery
EL
The supply voltage is higher than the
nominal voltage.
EH
The supply voltage is lower than the
nominal voltage.
Check if the power supply is normal.
Switch on after the power supply
food is normal.
C1,C3
High temperature of the ceramic plate
sensor.
Wait for the temperature of the ceramic
hob to return to normal.
Touch the "ON/OFF" button to reset the
unit.
C2
High temperature of IGBT .
（ 1# ）
Wait for the IGBT temperature to return
to normal.
Touch the "ON/OFF" button to reset the
unit.
Check if the fan is working properly; if it is
not, call the
SAT Pando technical service.
INOXPAN S.L. - 2 3
GB
25