INSTALLATION MANUAL FOR MODEL E-220
page 6
Connect the rectangular to Ø 150 converter to the rectangular hood outlet, (It is a tight fit to
avoid leaks) and connect the hood to the MAINS.
WARNING! To avoid air leaks or the conduit detaching, seal the joint of the adaptor to the
hood, when fitted, seal well with adhesive aluminium tape.
without power until the installation is completely finished.
WARNING! Before connecting to the mains, make sure the socket is not live. It should be
Once it is connected, test in operation looking for air leaks, if everything is Ok, close the
500 x 500 false ceiling.
With the hatch open, you can see the on/off switch of the hood. (If all the connections have
been made) proceed to start it up.
WARNING! Once in operation, follow the instructions for synchronizing the remote control
on Page 8 (Before 15 seconds have passed press the light key on the remote control).
6- STARTING UP:
