Pandigital Snow Globe DPF User Manual Download Page 6

Page: 6 / 7

Power Options

Using Batteries

The snow globe can be powered by batteries or by the AC power adaptor.

1. Remove the base and insert 3 non

–rechargeable AAA batteries into the battery slot inside the base of the Snow

Globe.

2. Replace the base back into the snow globe, and lock it in place with the 2 screws. Turn on the power switch at the

bottom of the base.

Note: Your unit can run approximately 3 hours on battery power.

Using the AC Power Adaptor

1. Connect the USB cable to the power adaptor; connect the mini-USB connector through the base of the snow

globe in to the USB port on the photo player.

2. Plug the adaptor into a wall outlet and turn on the power switch at the bottom of the base.

Note: You can have batteries in the snow globe and still use the AC power adaptor.

Using your Snow Globe

1. Tilt the snow globe 90 degrees to left, the photo will switch to reverse to the previous photo.

2. Tilt the snow globe to 90 degrees to the right and the photo will forward to next photo.

3. Turn the snow globe upside down 180 degrees will turn on the music or turn off the music.

Power Switch

Summary of Contents for Snow Globe DPF

Page 1: ...Pandigital Snow Globe Digital Photo Frame Users Guide ...

Page 4: ...tate and click the crop button b Drag the crop window to crop your photo you can also rotate the photo by clicking the rotate button When you are done modifying the photo click on the Add to Device button to save the picture to the photo player c Click on the Restore button to undo any changes previously made Assembling Your Snow Globe ...

Page 5: ...er 3 Attach the photo player to the top of the base The base clips will click into the photo player and hold it in place Insert the base and the photo player into the snow globe and screw in the base with the two screws which are included in the box 4 Turn on the power switch at the bottom of the base Power Switch Speaker Connector ...