User’s Guide
28
Changing the Product’s IP Address in a Wired Network
To change the product’s IP address, you need to install the Network Setup Tool.
The Network Setup Tool is included in the USB printer driver. After the
installation of the USB printer driver is completed, the Network Setup Tool is
automatically installed onto your computer. Follow these steps to update the IP
address to the product in a wired network.
1.
Make sure the product is connected to your computer via a USB cable.
2.
Start Network Setup Tool by choosing the Start button and then select
All Programs>L1XX printer>Network Setup Tool in succession. The
following Network Setup Tool screen will be prompted.
L1 Printer
3.
On the [General] page, check [Wired (Ethernet)] Network.
4.
Click the [Wired (Ethernet)] tab to prompt the Wired (Ethernet) page.