User Manual / Installation Guide
2
Operation / Testing:
Note:
1. turn on the power, the LED light ruleless flash in the short time, if LED light flash regularly, it means the
wireless receiving signal had been blocked, maybe wireless siren had been broken or affected by strong
electromagnetic wave interference;
2. when open the wireless siren cover, it will make once sound in each regular period;
3. don’t make short circuit between any pins of JP1 jumper switch and BAT jumper switch, otherwise, it will
broken down wireless siren.
How to connect the External Power Adapter with Wireless Siren correctly?
press and hold on “
SAVE
” button, and then detect
wireless equipment, wireless siren will make the
indicate sound when match code successfully
1. coding method
2. delete coding method
press and hold on “
SAVE
” and “
CLR
” buttons, LED light
will turn on few seconds, and then turn off, when LED
light turn on again, it means delete coding successfully
3. battery power switch
“
BAT
” jumper switch is control the power from built-in
battery or external power adapter, if turn off this switch,
it means no power come from built-in battery, wireless
siren can’t keep working when external power off
4. volume control switch
“
JP1
” jumper switch is control volume of wireless
siren, if turn off this switch, the volume lower, turn on
switch, the volume higher