![background image](http://html1.mh-extra.com/html/pande-microcomputer-systems/xpc560b/xpc560b_user-manual_3070594046.webp)
42
xPC560B EVB User Manual
Figure 6-1: Boot Configuration Jumpers
6.2
Power Configuration
When the xPC560B Mini-Module is plugged into the xPC56XXMB
motherboard, power is supplied directly by the motherboard. In this setup, the
external power supply input available on the Mini-Module should NOT be
used.
When the xPC560B Mini-Module is used as a stand-alone board, an external
5V or 3.3V power supply must be used. The xPC560BADPT208S is the only
xPC560B Mini-Module that is able to accept both 5V and 3.3V for input power
when used as a stand-alone board.
The following jumpers affect the power supply pins of the MPC560xB
processor:
J4
–
Debug
Port
Voltage
Configuration
Sets the logic voltage level on the 14-pin JTAG port and 38-pin MICTOR port
(if available). These ports are used by external interface hardware to
Summary of Contents for xPC560B
