User Manual For CYCLONE Programmers
12
SWD Mode is selected from the “Communication Mode” drop-down box in the Cyclone Image
Creation Utility:
Figure 3-9: Communications Mode Selection
3.17
Target Headers For Part# CYCLONE_UNIVERSAL
PEmicro Part# CYCLONE_UNIVERSAL features 6 ports labeled A-H.
3.17.1
PORT A: 10-Pin Keyed Mini Connector (Kinetis, S32 (ARM), other PEmicro-Supported ARM
devices)
The Cyclone provides a keyed 10-pin 0.050-inch pitch double row connector for ARM targets. The
location of the this header is indicated as PORT A in
. The 10-pin keyed mini connector
pin definitions for JTAG mode are as follows:
10-Pin Keyed Mini Connector JTAG Mode Pin Assignments
PIN 1 -
TVCC
TMS -
PIN 2
PIN 3 -
GND
TCK -
PIN 4
PIN 5 -
GND
TDO -
PIN 6
PIN 7 -
NC
TDI -
PIN 8
PIN 9 -
NC
RESET -
PIN 10
CYCLONE
programmers also support SWD Mode. This replaces the JTAG connection with a
clock and single bi-directional data pin.
10-Pin Keyed Mini Connector SWD Mode Pin Assignments
PIN 1 -
TVCC
TMS/SWDIO -
PIN 2
PIN 3 -
GND
TCK/SWCLK -
PIN 4
PIN 5 -
GND
NC -
PIN 6
PIN 7 -
NC
NC -
PIN 8
PIN 9 -
NC
RESET -
PIN 10
SWD Mode is selected from the “Communication Mode” drop-down box in the Cyclone Image
Creation Utility:
