Technical Manual
P&B Engineering
ISSUE 7 28/9/99
Page
25
9.7. Data Display Pages
The following menus can be displayed by the Data Page Key:
Measured Data
Calculated Data
Logical Inputs/Contact Status
Statistical Data
Fault Data
Each data page provides the following displayed information:
Measured Data
Phase and Line Voltages
(+/- 1.0%)
Phase Currents
(+/- 1.5%)
Earth Fault Current
(+/- 1.5%)
Channel Resistance
(+/- 3.0%)
Power VA
(+/- 5.0%)
Power KW
(+/- 5.0%)
Power Factor
Calculated Data
Motor Load as a % of FLC
(+/- 1.0%)
Thermal Capacity as a % of FLC
(+/- 1.5%)
Time to Trip in Minutes and Seconds
(+/- 2.0%)
Time to Start in Minutes and Seconds
(+/- 2.0%)
Unbalance Current as a percentage
(+/- 2.0%)
Logical Inputs/Contact Status
Drive Status
Contactor A N/O
Contactor A N/C
Contactor B N/O
Contactor B N/C
Plant Interlock
Isolator N/O
Isolator N/C
Start A Input
Start B Input
Stop Input
Local/Remote Control Status
PLC/Serial Port
PLC Control A
PLC Control B
PLC Reset
Speed Switch
Authorise Key
Emergency Stop
External Fault 2
External Fault 3
Statistical Data
Total Run Time [in steps of 1 Hours]
Total Number of Starts
Last Start Time
Last Starting Current
Number of Trips
Fault Data
Last Fault and Last Alarm
Fault currents, I1, I2, I3 Amps
(+/- 1.0%)
Earth Fault Current
(+/- 1.5%)
Fault voltages, V1, V2, V3 Volts
(+/- 1.0%)
Summary of Contents for MPC2000+
Page 4: ......
