Panda Vending MF1500, Instruction Manual

Page: 24 / 28

第
23
页
※
Note:all setting ensure the power is turn off, can be set.
Fault description
Fault code1:when the crown clock can’t complete full action,the display will
show code 01
Fault
code
Problem Examine and solve way
01
Can’t reset
1.Reboot power,if still can’t reset,please check the back
and left place final motion is normal or not, use hand
press,put,listen whether have”gege”sound, check the wire
whether loss.
2.check crown clock wire butt joint,whether loss and
imperfect connect.
3.Mainboard Fault
The claw can’t
work,when fetch
gift
1.weak claw set too law,please depends on item size and
weight adjust claw stress voltage
2.SW3 the four place,use on instead of off
Claw automatic
closed with
open power
1.Maybe the claw coil have sort circuit,plase change 。
2.Mothboard dip switches, SW-3 four place use off instead
of on
Rocker can’t
work,to front
and back
1.when use rocker,please check,micro motion whether
have fault and the wire loss or not.
2.Check the motherboard,J1 plug to PIN wire is good or
not
。
3.crown clock front palce fretting,back place whether has
fault.
4.front rear motor has fault and loss,or grear can’t bite
5.Check rocker J6 plug PIN whether loose and not plug 。
6.crown clock wire and machine wire whether normal 。