Software Update
Should it ever be necessary to update the software of midiBeam, e.g. to fulfil
wishes of users with new features, and make it available for earlier users too,
the software of both midiBeam devices can be updated through their
appropriate MIDI IN. Any software update file can be found on the web page of
Panda-Audio, either as a
*.bin
file for
midiBeamTool.exe
, or as a
*.mid
file, embedded in a System Exclusive package. Just like in case of the
parameter update, you need a computer with a MIDI interface, but in opposite
to that, it is only the appropriate device to be updated that has to be
connected to it, the other one is disregarded.
If you want to update TX02 then do the following:
1. Connect the MIDI OUT of the computer interface to the DIN plug of TX02.
2. Keep the pushbutton on TX02 pressed while you turn on the power
switch. The LED will stay dark.
3. Start the update dump.
4. At the end of the dump the LED will start to blink quickly. Turn it off and
turn it on again.
If you want to update RX02 then do the following:
1. Connect the MIDI OUT of the computer interface to the MIDI IN socket of
RX02.
2. Keep the pushbutton on RX02 pressed while you apply power through
USB. The LED will stay dark.
3. Start the update dump.
4. At the end of the dump the LED will start to blink quickly. Turn it off and
turn it on again.
Page | 9
