PANCONTROL PAN Luxmeter, Manual

Page: 26 / 210

EN 11
MEM READ function
Press the button MEM READ more than 1 seconds to store the current
measured value. You can store up to 99 measurements.
Press to read the measured values, MEM READ again for more than 1
sec., until R MEM 01 is displayed. With the up / down keys you can now
the values 01... 99 read out.
To deactivate this function, press MEM READ again longer than 1 sec.
To delete the stored data press MEM READ and the on/off switch at the
same time, until CLR is in the display.
8. Maintenance
Only authorized service technicians may repair the instrument.
Note:
If the instrument is malfunctioning, please test:
- Battery condition and polarity
- Condition of the fuse(s) if available.
- Condition of the test leads.
Changing the battery(s)

Replace the battery(s) when the battery symbol or BATT is displayed
on the LCD.

Remove test leads from any power source and turn the device OFF
before opening the cover!

Remove the protective cover and the screws of the battery or fuse
compartment using a proper screwdriver and remove the lid.

Replace the battery. Mind the correct polarity.