PANCONNECT UNI Instruction Manual Download Page 3

Page: 3 / 3

7|B

If you've chosen CMS for your panel, screw in the cover plate
to CMS using countersunk-head bolts

8|B

Place CMS to the lower part of the panel
and move it to the grooves
(in the arrow's direction)

9|B

Tighten the screws into the panel

10|B

Link CMS and cartridge with connection cable (if you have
more CMS in your panel, connect them as well)

UNI

More details:

Summary of Contents for UNI

Page 1: ...mm size of the panel A B UNI 6 377 mm 127 mm Technical parameters A B A 1 Based on the chosen size mark size of the hole in order to place the panel 2 Drill two holes in the opposite corners inside of...

Page 2: ...10 25 mm use upper groove for the desk height 24 42 mm use lower groove 6 Use hex key no 3 to tighten the clip 7 A If you ve chosen pullout for your panel place it on the lower part of the panel next...

Page 3: ...ountersunk head bolts 8 B Place CMS to the lower part of the panel and move it to the grooves in the arrow s direction 9 B Tighten the screws into the panel 10 B Link CMS and cartridge with connection...