PANAVISION PANALUX SONARA 4:4, Manual, Page: 12 / 43

Power Supply
1. Ensure the power cable is disconnected before
servicing.
2. SONARA only uses a mains connection. Do not
connect to a variable supply such as a dimmer rack,
variac, or inverter.
3. The power cable should be plugged into SONARA
before switching the mains power supply ON. The
mains power supply should be switched OFF before
removing the power cable.
4. SONARA is shipped with a 7A fuse in the casket. For
use in 110V locations, this should be changed to a 15A
version (15A fuse not included).
Safety Cables
1. A minimum of one safety cable MUST be used when
hanging SONARA from its yoke or eye bolts or using
quick triggers. The length should be as short as
possible to reduce travel distance if the primary hanging
fails.
2. The safety cable slot (as shown on page 11) MUST be
used to attach a safety cable.
3. Ensure safety cables are capable of supporting the
combined load of the SONARA and accessories.
Note
SONARA has been built to conform to international
regulatory standards relating to professional lighting
equipment. Any modification made to SONARA will void the
manufacturers’ warranty.
Approvals
EU
EN 55015:2013
EN 61547:2009
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 61000-4-2:2009
EN61000-4-3:2006+A1:2008+A2:2010
EN 61000-4-4:2012
EN 61000-4-5:2006
EN 61000-4-6:2009
EN 61000-4-8:2010
EN 61000-4-11:2004
FCC
47 CFR of part 15
CSA
and UL
CSA C22.2 No. 250.4-14
CAN/CSA C22.2 No. 250.13-14
UL Standard No. 153
UL Standard No. 8750
Certifications
ROHS
EPA3050B:1996
EN1122B:2011
EPA3052:1996
EPA7196A:1992
APE3540C:1996
EPA8270D:2007
Europe
EN / IEC 62471
LATEST VERSION AS OF JULY 2021 PANALUX SONARA 4:4 USER MANUAL 12