I-75114-296 / Page 2 of 2
08-29-00
There may be recent updates to this Instruction Sheet, please visit our website or contact PanaVise Products, Inc. for the latest revision as well as for the most
complete up-to-date PanaVise
InDash Applications List
: 7540 Colbert Dr., Reno, NV, Phone: 800.759.7535, 775.850.2900, Fax: 800.395.8002, www.panavise.com
INSTRUCTIONS FOR GRAND AM 99-2000 ONLY:
STEP #1
Apply emergency brake, turn ignition on, DO NOT START vehicle and shift into first gear. With the
hook tool remove the molding that surrounds the radio and climate control by pulling from the top
round corners and working your way toward the bottom to release all clips. Once clips have been
released push molding to the left. DO NOT DISCONNECT WIRES.
STEP #2
Remove one screw located on the right side of the radio. Attach phone holder to Indash Mount. If using
a PortaGrip phone holder; adjust to size of phone prior to mounting. Place the Indash Mount over the
screw hole and guide pin, the second bend of the Indash will rest on the face of the radio. Reinstall the
one screw and tighten with a 7mm open end wrench.
STEP #3
Reinstall the molding back into place by guiding the Indash through the radio opening of the molding.
Align all clips and push to secure in place.
STEP #4
Attach phone holder to Indash Mount. If using a PortaGrip phone holder, adjust to size of phone prior
to mounting.
INSTALLATION IS NOW COMPLETE. ENJOY YOUR NEW PANAVISE INDASH MOUNT.
INSTRUCTIONS FOR GRAND PRIX 99-2001 ONLY:
STEP #1
With the hook tool pull the bezel that surrounds the radio starting from the top and to the right of the
center air vents. Release the right side of the bezel; once released pull the bezel from the right side
of the radio and remove the screw from the right side of the radio.
STEP #2
Attach phone holder to Indash Mount. If using a PortaGrip phone holder, adjust to size of phone prior
to mounting. Place the Indash Mount through the radio opening of the bezel and align holes. While
holding the bezel, reinstall the screw on the right side of the radio using the open end wrench.
STEP #3
Push the bezel back into place starting from the bottom side
INSTALLATION IS NOW COMPLETE. ENJOY YOUR NEW PANAVISE INDASH MOUNT.
Installation location Grand Am
Installation Grand Prix
