Panasonic Zener Diodes MAZ8xxxG Series, Specifications

Page: 1 / 8

Zener Diodes
Publication date: July 2008 SKE00032BED
1
This product complies with RoHS Directive (EU 2002/95/EC).
MAZ8xxxG Series
Silicon planar type
For stabilization of power supply

Features

Extremely low noise voltage caused from the diode (2.4 V to
39V, 1/3 to 1/10 of our conventional MAZ3xxx series)

Extremely good rising performance (in the low-current range)

Easy-to-select the optimum diode because of their fi nely divided
zener-voltage ranks

Guaranteed reliability, equivalent to that of conventional products
(Mini type package)

Allowing to reduce the mounting area, thickness and weight
substantially, compared with those of the conventional products

Allowing both re fl ow and fl ow mode of automatic soldering

Allowing automatic mounting by an existing chip mounter

Absolute Maximum Ratings T
a
= 25 ° C
Parameter Symbol Rating Unit
Repetitive peak forward current I
FRM
200 mA
Power dissipation * P
D
150 mW
Junction temperature T
j
150 ° C
Storage temperature T
stg
–55 to +150 ° C
Note) *: P
D
= 150 mW achieved with a printed circuit board.

Common Electrical Characteristics T
a
= 25 ° C ± 3 ° C
Parameter Symbol Conditions Min Typ Max Unit
Forward voltage V
F
I
F
= 10 mA 0.9 1.0 V
Zener voltage *1 V
Z
I
Z
Speci fi ed value V
Zener rise operating resistance R
ZK
I
Z
Speci fi ed value
Refer to the list of the
electrical characteristics
within part numbers
W
Zener operating resistance R
Z
I
Z
Speci fi ed value
W
Reverse current I
R
V
R
Speci fi ed value m A
Temperature coef fi cient of zener voltage *2 S
Z
I
Z
Speci fi ed value mV/ ° C
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Absolute frequency of input and output is 5 MHz.
3. The temperature must be controlled 25 ° C for V
Z
mesurement.
V
Z
value measured at other temperature must be adjusted to V
Z
(25 ° C)
4. *1 : V
Z
guaranted 20 ms after current fl ow.
*2 : T
j
= 25 ° C to 150 ° C

Package

Code
SMini2-F3

Pin Name
1: Anode
2: Cathode

Marking symbol
Refer to the list of the electrical
characteristics within part numbers