Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
AYF51
ACCTB19E 201201-T
SPECIFICATIONS
1. Characteristics
2. Material and surface treatment
DIMENSIONS
(Unit: mm)
Item
Specifications
Conditions
Electrical
characteristics
Rated current
0.5A/pin contact
Rated voltage
50V AC/DC
Insulation resistance
Min. 1,000M
Ω
(initial)
Using 250V DC megger
Breakdown voltage
250V AC for 1 min.
No short-circuiting or damage at a detection current of 1 mA
when the specified voltage is applied for one minute.
Contact resistance
Max. 45m
Ω
Based on the contact resistance measurement method
specified by JIS C 5402.
Mechanical
characteristics
FPC/FFC holding force
Min. 0.2N/pin contacts
×
pin contacts (initial)
Measurement of the maximum force applied until the
inserted compatible FPC is pulled out in the insertion axis
direction while the connector lever is closed
Contact holding force
Min. 1.5N/pin contacts
Measuring the maximum force.
As the contact is axially pull out.
Soldering terminal holding
force
Min. 1.5N/pin contacts
Measuring the maximum force.
As the soldering terminal is axially pull out.
Environmental
characteristics
Ambient temperature
–55
°
C to +85
°
C
No freezing at low temperatures. No dew condensation.
Storage temperature
–55
°
C to +85
°
C (product only)
–40
°
C to +50
°
C (emboss packing)
Thermal shock resistance
(with FPC/FFC inserted)
5 cycles,
contact resistance max. 45m
Ω
Sequence
1. –40
°
C, 30 minutes
2. Normal temperature (+20 to 35
°
C), 5 to 15 minutes
3. +85
°
C, 30 minutes
4. Normal temperature (+20 to 35
°
C), 5 to 15 minutes
Humidity resistance
(with FPC/FFC inserted)
120 hours,
insulation resistance min. 500M
Ω
,
contact resistance max. 45m
Ω
Bath temperature 40
±
2
°
C,
humidity 90 to 95% R.H.
Saltwater spray resistance
(with FPC/FFC inserted)
24 hours,
contact resistance max. 45m
Ω
Bath temperature 35
±
2
°
C,
saltwater concentration 5
±
1%
H
2
S resistance
(with FPC/FFC inserted)
48 hours,
contact resistance max. 45m
Ω
Bath temperature 40
±
2
°
C, gas concentration 3
±
1 ppm,
humidity 75% R.H.
Soldering heat resistance
Peak temperature: 250
°
C or less
Reflow soldering
300
°
C within 5 sec. 350
°
C within 3 sec.
Soldering iron
Lifetime
characteristics
Insertion and removal life
30 times
Repeated insertion and removal: min. 10 sec./time
Unit weight
24 pin contact type: 0.32 g
Part name
Material
Surface treatment
Molded portion
Housing: Polyamide resin
Slider: PPS resin
—
Contact
Copper alloy
Contact portion; Base: Ni plating, Surface: Au plating
Terminal portion; Base: Ni plating, Surface: Au plating
Soldering terminal portion
Copper alloy
Base: Ni plating, Surface: Sn plating
When the slider is opened (reference)
(15
°
)
(FPC insertion depth)
2.70
(0.20)
0.50
1.60
B
±
0.10
A
±
0.15
C
±
0.15
0.50
±
0.10
0.20
±
0.05
1.20
4.75
5.20
0.60
1.90
(1.55)
(0.45)
Number of pins/
dimension
A
B
C
15
12.0
7.0
13.4
24
16.5
11.5
17.9
