24
3-2. Setup
– Display Mode
Press the SETUP button and select DISPLAY. Then, the DISPLAY menu displays as picture below.
Navigate through the menu items using the mouse or the control button (
◀ ▲ ▶ ▼
) on the remote control
and change the value of the menu item.
Figure 3.2.1. Display mode setup screen
Table 3.2.1. Menu items in DISPLAY mode setup
Item
Description
OSD
Enable/disable on-screen-display.
OSD CONTRAST
Set the visibility level of the On Screen Display (OSD).(50~100)
SEQUENCE
Enable/disable sequential display of video in full screen mode.
SEQUENCE-
DWELL TIME
Set the dwell time of each, quad, 9 or 16 channels display in sequential
display mode.(3-60seconds)
CHANNEL
Select a channel for applying the following settings using the mouse or
Summary of Contents for X-Plus Series SP-DRH04
Page 81: ...81 9 7 3 DEVICE ...
Page 82: ...82 9 7 4 STORAGE 9 7 5 SYSTEM ...