background image

Before attempting to connect or install this product,

please read these instructions carefully and save this manual for future use.

All-in-One Headset

Model No.

WX-CH2050

INTRODUCTION

The WX-CH2050 is an all-in-one headset designed for use
in wireless communication systems, which are use in Drive-
thru menu boards, etc. It incorporates such necessary
devices as the battery compartment and control buttons
besides the microphone and earphone. The built-in anten-
nas, transmitter, and receiver enable you to communicate
with other store personnel and the customer by audio.

FEATURES

• Compatible center modules: WX-C1010, WX-C1011,

and WX-CC2010

• Less noise and interference thanks to the use of UHF

band

• Easy frequency setting by use of phase locked loop

(PLL)

• A/B channel selection available for convenience of dou-

ble drive-through (DDT)

• Talk mode selectable between talk-lock and press-to-

talk

• Page mode selectable between page-lock and press-

to-talk

• Easy-to-replace cushions: head pad cushion, earphone

cushion, and windproof cushion

The serial number of this product may be found in the bat-
tery compartment of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.

Model No.

WX-CH2050

Serial No.

CAUTION

It is a violation of Federal Law to begin operating this sys-
tem prior to obtaining an FCC Radio License. The FCC ID
number for this radio equipment is listed below.

FCC ID: ACJ9TAWX-CH2050

CONTENTS

INTRODUCTION ..................................................................1
FEATURES ...........................................................................1
PRECAUTIONS ....................................................................2
NAMES & FUNCTIONS ........................................................2
OPERATING PROCEDURES................................................4

Preparations .................................................................4

Communications with Customers [TALK] ....................5

Communications with Other Store Personnel 

[PAGE] .....................5

BATTERY LOADING & REPLACEMENT ..............................6
MAINTENANCE....................................................................6
TROUBLESHOOTING ..........................................................7
SPECIFICATIONS ................................................................7
STANDARD ACCESSORIES ................................................7
OPTIONAL ACCESSORIES..................................................7
SETUP PROCEDURES .........................................................8

Opening the Switch Pocket ..........................................8

Channel Group Selection .............................................8

DIP Switch Setup..........................................................9

Channel Interference Check ........................................9

Operation Mode Setup ...............................................10

ATTENTION:

A lithium-ion battery that is recyclable powers
the product you have purchased. Please call 1-
800-8-BATTERY for information on how to recy-
cle this battery.

Summary of Contents for WXCH2050 - WIRELESS ORDER TAKER













Reviews: