19
ENGLISH
Setting the microphone sensitivity
Sets the sensitivity to audio collected by the microphone unit.
1
Power indicator
2
4
Battery cover
A
1
2
ＯＮ
3
1
Make sure that the [PWR] indicator is off
2
Remove the battery cover
Press on the portion labeled as on the back of the battery cover and slide the cover
downwards to remove it.
3
Set the microphone sensitivity
Set the sensitivity setting switch. Use the tip of a pen, screwdriver, or other narrow
pointed object to control the switch. The settings for the switch are as follows.
[SENS L]: Low sensitivity (factory default)
[SENS H]: High sensitivity
4
Place the battery cover back on
Slide the battery cover upwards to place it back on.
memo
Important
Changing this setting while the microphone is turned ON could lead to
noise. Turn down the volume on the power amplifier or mixer before
changing this setting.
memo
Important
Set the sensitivity to “Low” when the microphone unit is close to the mouth.
Set the sensitivity to “High” when the microphone unit is far from the mouth
or when the volume of voice is low.
PGQX2327VAV6_WX-ST400_OI_en-fr.indb 19
2022/01/24 11:23:24
