13
Easy wireless design operation flow
ENGLISH
STEP4: Microphone analysis
When you click the [Antenna location complete] button, the screen switches to the [Mic location/analysis] screen again. In the
[Used microphone list], input the number of microphones to be used in each area. When inputting the number of microphones is
complete, click the [Location analysis] button.
1
2
Microphone installation procedure
1
Click the [Location analysis] button.
Microphone location analysis begins. Check that the result is “OK”.
If result is “NG”, the number of antennas of any NG area turns red. Increase or decrease the number of microphones in the
NG area and then click the [Location analysis] button again and check the number of microphones that can be used.
2
Select the [4.Output] tab.
The screen switches to the [Output] screen. The models and quantities required for the installed wireless system are
displayed and you can create the estimate (price) and print the result.
memo
Important
●
For details on microphone location and analysis, refer to “Microphone analysis” (page 39).
●
For details on the [Output] screen, refer to “Print” (page 41).
●
Use the results of this tool as a reference when arranging the antenna to install it around the recommended
location.
●
If the antenna location is decided in advance, correct the antenna location to the place where you can actually
install it, and check again that there are no problems with the field selection and number of microphones used.
●
