39
English
Using an SD card
[SD Memory Card]
w
w
Restoring the backup data
This function is used to restore the data backed up on an
SD card.
1
On the Settings screen, touch the [SD Memory
Card] button, and then the [Restore] button.
w
p
The backup data list is displayed.
2
Touch the data button for the date to be
restored.
3
Select the restoration type.
Touch either of the following buttons to select a
restoration type.
[Operation Settings]
Enter the following settings in the unit. Use this button
when replacing seasonal settings or using the settings
of another store.
• All-In-One Headsets or Belt Packs group setting
• Nighttime volume setting
• Store Hours setting
• Various sound volumes settings
• DSP seting
• Various messages settings
[All Settings]
Reflect all the settings, including the network settings
and NW camera settings in this unit. Use this button to
return the system to the settings before a failure, etc.
When the [Operation Settings] button is touched
w
p
The following confirmation pop-up screen is
displayed. To perform restoration, touch the [OK]
button. To cancel restoration, touch the [Cancel]
button.
w
p
Touch the [OK] button to start restoration. When
restoration is completed normally, the completion
pop-up screen is displayed.
When the [All Settings] button is touched
w
p
The following pop-up screen is displayed. To
perform restoration, touch the [OK] button. To cancel
restoration, touch the [Cancel] button.
w
p
Touch the [OK] button to start restoration. After
restoration is performed, the system restarts
automatically.
w
p
The message sound source file on the SD card used
before restoration is deleted and then replaced with
the sound source file contained in the restoration
data. Back it up as necessary.
w
p
The registration information for the All-In-One
Headsets or Belt Packs and repeaters is not restored.
w
p
After restoration is performed in “All Settings”, the
system restarts automatically.
Note
