background image

2002      © Matsushita Communication Industrial Co., Ltd.

Panasonic Digital Communications & Security Company
Unit Company of Matsushita Electric Corporation of America
Security Systems
www.panasonic.com/cctv

Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094
Zone Office
Eastern: 
One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303
Central: 1707 N.Randal Road, Elgin, IL 60123 (847) 468-5205
Western: 6550 Katella Ave., Cypress, CA 90630 (714) 373-7840

PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010
PANASONIC SALES COMPANY
DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO INC.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, P. R. 00985 (809)750-4300

Pick-up Device:

771 (H) x 492 (V) pixels, Interline Transfer CCD

Scanning Area:

4.8 (H) x 3.6 (V) mm (Equivalent to scanning area
of 1/3” pick-up tube)

Scanning:

525 lines/60 fields/30 frames

Horizontal:

15.734 kHz

Vertical:

59.94 Hz

Synchronization:

Internal, Line-locked or Multiplexed Vertical Drive
(VD2) selectable

Video Output:

1.0 V[p-p] NTSC composite 75 

/BNC connector

Horizontal Resolution:

480 lines (C/L), 570 lines (B/W)

Signal-to-Noise Ratio:

50 dB (Equivalent to AGC Off, weight On)

Dynamic Range:

46 dB

Minimum Illumination:

0.8 lx (0.08 footcandle) at F1.4 (C/L), 0.1 lx (0.01
footcandle) at F1.4 (B/W)

Gain Control:

ON (DNR-H), ON (DNR-L) or OFF (SET UP MENU)
selectable

White Balance:

ATW1, ATW2 or AWC (SET UP MENU) selectable

Aperture:

Set Variable (SET UP MENU)

Electronic Light Control:

Equivalent to continuous variable shutter speeds
between 1/60 s and 1/10 000 s

Super Dynamic

2

:

ON or OFF (SET UP MENU) selectable

Electronic Shutter Speed:

1/60 (OFF), 1/100, 1/250, 1/500, 1/1 000,1/2 000,
1/4 000, 1/10 000 s selectable

Lens Mount:

CS-mount (supplied with C-mount adapter)

ALC Lens:

DC or Video selectable

Ambient Operating Temperature:

–10 °C - +50 °C (14 °F - 122 °F)

Ambient Operating Humidity:

Less than 90 %

Power Source and Power Consumption: 24 V AC 60 Hz, 4.3 W
Dimensions (without lens):

67 mm (W) x 65 mm (H) x 72.5 mm (D)
2-5/8” (W) x 2-9/16” (H) x 2-7/8” (D)

Weights (without lens):

0.33 k

g

(0.7 lbs.)

Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.

SPECIFICATIONS

OPTIONAL ACCESSORIES

Lenses :

WV-LA2R8C3B, WV-LA4R5C3B, WV-LA9C3B, WV-LA210C3, WV-LA408C3
WV-LA908C3, WV-LZ61/10, WV-LZ61/15, WV-LZA61/2, WV-LZ62/2, 
WV-LZ62/8, WV-LF4R5C3A, WV-LF9C3A, WV-LZF61/2

STANDARD ACCESSORIES

Body Cap.....................................................................1 pc.
ALC Lens Connector (YFE4191J100)..........................1 pc.
C-mount Adapter .........................................................1 pc.

Summary of Contents for WVCP474 - COLOR CCTV CAMERAS







Reviews: