4
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Video Monitor WV-BM
POWER
OFF
ON
V.HOLD
BRIGHT
CONTRAST
VIDEO IN
VIDEO OUT
q w
r
t
y u
i
e
q
Power Switch (POWER, ON/OFF)
This is a push-push type switch which turns the power
of this monitor on and off.
Press once (switch remains down (
;
)) to turn on the
power of the monitor.
Press again (switch comes up (
l
)) to turn off the
power of the monitor.
w
Power Indicator
Is on when the monitor’s power is turned on.
e
Vertical Hold Control (V-HOLD)
This control is used to lock the vertical position of the
picture.
r
Brightness Control (BRIGHT)
Adjusts the picture brightness. Turn this control clock-
wise to increase the picture brightness, and turning the
control counterclockwise has the reverse effect.
t
Contrast Control (CONTRAST)
Adjusts the picture contrast. Turn this control clockwise
to increase the picture contrast, and turning the control
counterclockwise has the reverse effect.
y
Video Input Connector (VIDEO IN)
For input of the composite video signal from the out-
board device.
u
Video Output Connector (VIDEO OUT)
The video input signal connected to the video input
connector
y
is looped through to this connector and
terminated automatically.
i
AC Power Cord
Plug the power cord to an AC outlet.
●
Front View
●
Rear View
