12
Cleaning of the dome cover
When cleaning the dome cover, hose or
spray fresh water that is not containing
lubricant agent or silicon substances and
wash away adherents such as grain of sand.
If dirt is hard to remove, use a sponge
soaked into the fresh water mentioned
above and wipe off.
Do not wipe the dome cover with a dry cloth.
(Using dry cloth may spread oil constituent
adhered to the surface, and it may result in
damaging the rain wash coating.)
If dirt cannot be wiped off with a damp
cloth, use a neutral detergent for
dishwashing. After that, sufficiently rinse off
the detergent. If wax-contained car washing
detergent, abrasive compound, or other
than neutral solution (weak alkaline or
slightly acid) is used, hydrophilic property
may deteriorate or the surface coating may
peel off.
Do not use organic solvent such as benzine
and thinner.
Before using a spray, abandon a few sprays
to eliminate impurities.
*
Improper cleaning of the dome cover may
cause the rain wash coating to become less
effective. In this case, in order to have
effective rain wash coating, a new dome cover
must be purchased to replace the existing
dome cover. Consult with your dealer or
construction contractor.
About the rain wash coating
Due to effectiveness of the rain wash coating,
drops are likely to be accumulated right under
the camera and it may cause a partial distor-
tion of the video.
AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE
AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL USE OF A CONSUMER OR
OTHER USES IN WHICH IT DOES NOT
RECEIVE REMUNERATION TO (i) ENCODE
VIDEO IN COMPLIANCE WITH THE AVC
STANDARD (“AVC VIDEO”) AND/OR (ii)
DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A
PERSONAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO
LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM
Equipment classification and power
source indication label
Remove the rear cover of this product to refer
to the indication label for the equipment classi-
fication, power source, and other information.
Product disposal/transfer
Data saved on this product or a storage device
used with this product may lead to personal
information leakage. When it is necessary to
dispose or give this product to someone, even
when for repair, make sure that there is no data
on this product.
When abandoning the memory media, it is rec-
ommended to destroy it physically after delet-
ing data by PC.
Meaning of symbols
: Direct current symbol
Indication label
Rear cover
