55
Multicast
6.3.8
The multicast interface is shown as in Figure 6-28.
Multicast is a transmission mode of data packet. When there is multiple-host to receive the same data
packet, multiple-cast is the best option to reduce the broad width and the CPU load. The source host
can just send out one data to transit. This function also depends on the relationship of the group
member and group of the outer.
Here you can set multicast address and port. You also need to go to Live interface to set the protocol as
Multicast.
Figure 6-28
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
Select to enable multicast function.
Multicast Address
The range of multicast address of Main Stream, Sub Stream1 and Sub
Stream2 is 224.0.0.0 -239.255.255.255.
Multicast
Port
Multicast port. The range is 1025 - 65534.
Summary of Contents for WV-V1330L1
Page 56: ...52 Figure 6 26 Figure 6 27 ...
