background image

Do not turn off the power of the camera until the deletion is complete. When the power of the
camera is turned off in the process of the deletion, some images may remain on the SD memory

card. In this case, click the 

 button on the same log list window used to delete the logs.

 (Download) button:

 Click this button to download all logs of the selected log list onto the PC.

Note

The following settings may be required.
Open Internet Explorer, click [Tools] 

®

 [Internet Options] 

®

 [Security] 

®

 [Trusted Sites] 

®

[Sites]. Register the camera address on [Website] of the displayed trusted windows.
After registration, close the web browser, and then access the camera again.

Up to 50,000 logs will be downloaded to the SD memory card. When more than 50,000 logs
are filed, the older logs will be overwritten by the newer logs. In this case, the oldest log is the
first to be overwritten.
If there are many logs, it may take time to download the logs.

 (Close) button:

 Click this button to close the log list window.

Operating Instructions

29

1 Operations

Summary of Contents for WV-U2500 Series

























































































































































































Reviews: