![background image](http://html.mh-extra.com/html/panasonic/wv-u1100-series/wv-u1100-series_operating-instructions-manual_1511958086.webp)
•
Preset:
Performs the preset movement to each specified focus position when switching between color and
black & white images. The preset position is the focus position specified last time, which was automatically
memorized for each of color images and black & white images.
•
Fix:
Fixes the position after adjusting the focus either automatically or manually.
•
Default:
Auto
IMPORTANT
•
If the focus cannot be adjusted automatically when switching between the color mode and the black
& white mode when “Auto” is selected, select “Preset” or “Fix” and adjust the focus manually.
[Close] button
Click this button to close the “Zoom/Focus adjustment” setup menu.
2.5.4.4 Adjust the angular field of view with extra zoom [WV-U2540L]
[WV-U2530L] [WV-U2140L] [WV-U2130L] [WV-U1130]
Click the [Setup>>] button of “Extra zoom” on the [Image/Privacy] tab of the “Image” page. (
It is possible to adjust the angular field of view using the extra zoom function.
•
Click this button to adjust the zoom ratio to the “Wide” side.
•
Click this button to set the zoom ratio to x1.0.
•
Click this button to adjust the zoom ratio to the “Tele” side.
Note
•
The maximum zoom ratio for extra zoom varies depending on the model and the selected [Image
capture mode].
•
Refer to the Important Information for more information about the maximum zoom ratio.
IMPORTANT
•
The extra zoom function may not be activated on the appropriate position if the setting for the function
is performed after the settings for the VIQS area (
®
area (
page 98). Therefore, configure each area's settings after configuring the extra zoom settings.
•
Configure mask area settings with a zoom ratio of x1.0. The mask area (
mask position of zoom ratio of x1.0 even after extra zoom settings.
86
Operating Instructions
2 Settings