13
Major operating controls
<Camera>
About the initial set button
After turning off the power of the camera, while recharging the battery, turn on the power of the
camera while holding down this button, and wait for about 5 seconds or more without releasing this
button. Wait about 3 minutes after releasing the button. The camera will start up and the settings
including the network settings will be initialized. Before initializing the settings, it is recommended to
write down the settings in advance.
WV-TW310
Lens cover
Clip
Connecting
cable
Mic hole
Initial set button
REC button
(Recording start button)
Connector
SDHC memory card slot