35
c
Select the camera you want to configure, and click [Access Camera].
Note:
•
When cameras are displayed in [IP Setting Software] screen, click the camera with same
MAC address as the MAC address printed on the camera that you want to configure.
v
It is necessary to install the viewer software “Network Camera View 4S” to display images.
Follow the instructions of the wizard to start the installation.
• The “Live” page will be displayed.
• Perform the [Time & date] settings in the “Setup” - “Basic” page before using the
camera.
Note:
•
When no image is displayed on the “Live” page, refer to the Troubleshooting in the
Operating Instructions on the provided CD-ROM.
• It is possible to enhance the network security by encrypting the access to cameras using
the HTTPS function. Refer to the Operating instructions on the provided CD-ROM for how
to configure the HTTPS settings.
• Click the [Setup] button on the “Live” page, the user authentication window will be displayed.
Enter the default user name and password as follows, and log in.
User name: admin
Password: 12345
• When changing settings related to the network settings, such as connection mode, IP
address, and subnet mask, click the [Network Settings] button in [IP Setting Software]
screen as shown in step 3, then change each setting.
• Due to security enhancements in
“
IP Setting Software
”
,
“
Network settings
”
of the camera
to be configured cannot be changed when around 20 minutes have passed after turning
on the power of the camera. (When the effective period is set to
“
20 min
”
in the
“
Easy IP
Setup accommodate period
”
.)
However, settings can be changed after 20 minutes for cameras in the initial set mode.