20
Secure the camera to the camera mount bracket
The tilt angle is locked downward at shipment.
z
Loosen the tilting lock screw approx. 1 rotation and adjust the tilt angle of the camera to the
horizontal position.
x
Tighten the tilting lock screw again after tilt angle adjustment.
Note:
• Use a hexagonal wrench with width across flats of 4 mm (locally procured) to loosen or tighten
the tilting lock screw.
Tilting lock screw
Camera main body
Approx. 90°
Horizontal
c
Pass each cable and the safety wire through the camera mount bracket, and secure the cam-
era to the camera mount bracket with the camera fixing screws x3 (accessory).
Pass the network cable first through the camera mount bracket before passing through the
other cables.
IMPORTANT:
• Ensure that the camera fixing screws (accessory) are firmly secured.
Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}
Safety wire
Network cable
Camera mount bracket
Camera main body
Camera fixing screw x3 (M4 x 8)
(accessories)
Camera mount bracket
Drain slit
Cable clamp
Video output cable
Mounting boss for safety wire
Installations / Connections
(This illustration represents WV-SW316.)
(This illustration represents WV-SW316.)
Summary of Contents for WV-SW314
Page 49: ...49 ...
