15
About the initial set button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for around 5 seconds or more without releasing the button. Wait around 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Do not turn off the power of the camera during the process of initialization. Before
initializing the settings, it is recommended to write down the settings in advance.
Major operating controls
Dome cover
Dome cover ring
Initial set button
Network cable
SDHC/SD memory card slot
SD memory card error indicator
(lit when data cannot be saved)
Access indicator
(lit when accessing)
Link indicator
(lit when linking)
Enclosure
Lens
Bracket rubber A
Mount bracket
Summary of Contents for WV-SW115
Page 35: ...35 ...
