13
About SD memory card
• To remove the SD memory card from the
unit, press the [Setup] button on the “Live”
page, select the [SD memory card] tab,
and set the SD memory card operation to
“Not use”. Then, remove the SD memory
card. Alternatively, hold down the SD ON/
OFF button for about 2 seconds. When
the flashing SD MOUNT lamp goes out,
you can remove the SD memory card.
• When using an SD memory card, format it
using this product. Recorded data on the
SD memory card will be deleted when for-
matted. If an unformatted SD memory card
or an SD memory card formatted with
other devices is used, this product may not
work properly or performance deterioration
may be caused. Refer to the Operating
Instructions on the provided CD-ROM for
how to format an SD memory card.
• When some SD memory cards are used
with this product, the product may not
work properly or performance deterioration
may be caused. Use the compatible SD
memory cards in page 28.
• When using an SD memory card support-
ing Class 10 of the speed class, use a
UHS-I (Ultra High Speed-I) compliant card.
We shall not be liable for content compen-
sation, losses of recorded or edited con-
tent and any direct or indirect consequent
damages caused by failure to record or
edit due to faults with this unit or the SD
memory card. In addition, the same provi-
sions apply after unit is reparied.
About the dehumidifying device
SPW531L
SPW311L
• This product has dehumidifying device to
keep the inside at low moisture level, pre-
venting condensation and quickly dissipat-
ing dew if produced.
• Dew may be produced depending on the
conditions of temperature, humidity, winds,
and rain, and it may take time to dehumidify.
• Do not cover the surface of the dehumidi-
fying device.
Dehumidifying
device
What to do if “WARMING UP-PLEASE
WAIT” appears on the display.
This message indicates that the temperature
inside the camera has become extremely low.
Wait until the internal temperature of the cam-
era rises (for around 2 hours or more in tem-
peratures below -20 ºC {-4 °F}), turn the power
off once, then turn it back on again.
About desiccant
SPW532L
SPW312L
Desiccant should be replaced after about 3
years. The effective period may be shortened
according to environment. Besides, when
removing the front cover to adjust the camera
or process other operations, replace the desic-
cant with a new one.
Model No. of replacement part Desiccant
3CJ001261AAA
Summary of Contents for WV-SPW311AL
Page 31: ...31 ...