19
About the indicator
The indicator will light or blink as follows depending on the camera status.
Indicator type and operation state
Change of indicator indication
q
ACT indicator
When data is being sent via the network camera
Blinks green (accessing)
w
LINK indicator
When the camera is able to communicate with the con-
nected device
Lights orange
e
SD MOUNT indicator
• When an SD memory card is inserted and could be
recognized
Lights off
→
Blinks green
→
Lights off
• When data can be saved after the SD memory card is
inserted and the SD ON/OFF button is pressed
Lights off
→
Lights green
• When data can be saved to the SD memory card
Lights green
• When the SD memory card is removed after holding
down the SD ON/OFF button for about 2 seconds
Lights green
→
Blinks green
→
Lights off
• When data cannot be saved to the SD memory card
because an abnormality was detected or the SD
memory card is configured not to be used
Lights off
r
SD ERROR/ABF indicator
SPN311
SD ERROR/F.A. indicator
SPN310
• When ABF (Auto Back Focus) operation is being executed
SPN311
Blinks red (Interval of 1 time/ second)
• When the focus assist function is activated
SPN310
Blinks red (1 time)
• When the focus ring is positioned near the best focus
position
SPN310
Blinks red (1 time)
• When the set is being started
Lights red
• When an SD memory card is recognized normally
Lights red
→
Lights off
• When an abnormality is detected in SD memory card
after the camera has started
Lights red
q
r
w
e
<Side slide cover interior>
<Rear view>
<Example of WV-SPN311>
