20
Insert/remove a SD memory card (WV-SP509 only)
IMPORTANT:
• When inserting a SD memory card, make sure the direction.
• Before removing the SD memory card, make sure to select “Not use” for “SD memory card” on
the [SD memory card] tab of the “Basic” page on the setup menu first. (
☞
Operating
Instructions (included in the CD-ROM))
z
Open the slide cover on the side of the camera, and then insert a SD memory card into the SD
memory card slot.
x
If necessary, loosen the screw of the clamp for SD memory card and tighten the screw after
rotating the clamp 90 ° clockwise.
(Recommended tightening torque: 0.19 N·m {0.14 lbf·ft})
c
Close the slide cover on the side of the camera.
v
To remove the SD memory card, rotate the clamp for SD memory card 90 ° counterclockwise,
push the memory card to unlock it, and remove the memory card from the SD memory card
slot.
ABF
SDCARD LOCK
T
W
Label face downward
ABF
SDCARD LOCK
ABF
SDCARD LOCK
T
W
T
W
Screw of the clamp for
SD memory card
ABF
SDCARD LOCK
