Unavailable characters:
" &
[Load] button
Loads the setting data selected in “Scene file” and changes the current image accordingly.
[Register] button
The combination of settings used to adjust image quality that are currently displayed can be registered to the
scene file displayed in “Scene file”.
[Close] button
Click this button to quit the “Image adjust” setup menu.
11.4.2 Set mask areas
When “Off” is selected for “Super Dynamic(SD)”, “Wide dynamic range (WDR)” and “Back light compensation
(BLC)”, it is possible to compensate for backlight by masking brighter areas.
96
Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]