manualshive.com logo in svg

Panasonic WV-SFV310, Operating Instructions Manual

Share
Download
Panasonic WV-SFV310 Operating Instructions Manual Download Page 36

Select the image to be downloaded, and then click the [OK] button.

•

All:

 All images saved at the selected time and date will be downloaded.

•

Current image:

 Only the currently displayed image will be downloaded.

•

Download range:

 Images in the designated range of number of images will be downloaded.

Note

•

When the [Cancel] button is clicked in the process of the download, the download will be canceled. In
this case, images already downloaded before clicking the [Cancel] button will be saved on the PC.

•

In the process of the download, the operation buttons on the “Playback” page are invalidated.

[Browse] button

When successfully logged in after the user authentication process, a folder on the SD memory card in which
images are saved will be displayed. (

®

page 59)

36

Operating Instructions

7 Playback of images on the SD memory card

Summary of Contents for WV-SFV310





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands