![background image](http://html.mh-extra.com/html/panasonic/wv-sfn310/wv-sfn310_operating-instructions-manual_277999135.webp)
Note
•
When the [Authentication] setting has been changed, close the web browser, and then access the
camera again.
•
For other devices such as network disk recorders, unless otherwise stated, Digest authentication is
not supported. (As of August, 2013)
[User name]
Enter a user name.
•
Available number of characters:
1 - 32 characters
•
Unavailable characters:
" & : ; \
•
Default:
None (blank)
[Password] [Retype password]
Enter a password.
•
Available number of characters:
4 - 32 characters
•
Unavailable characters:
" &
•
Default:
None (blank)
Note
•
When the user name already in use is entered and the [Set] button is clicked, the respective user
information will be overwritten.
[Access level]
Select the access level of the user from the following.
•
1. Administrator:
Allowed all available operations of the camera.
•
2. Camera control:
Allowed to display images from the camera and to control the camera. The camera
setting configuration is unavailable.
•
3. Live only:
Only displaying live images is available. The camera setting configuration and camera control
are unavailable.
•
Default:
3. Live only
[User check]
From the pull-down menu of “User check”, the registered user can be selected and the selected user’s
information can be checked.
The registered user will be displayed with the access level.
(Example: admin [1])
To delete the registered user, click the [Delete] button after selecting the user to be deleted.
15.2 Configure the settings relating to the host
authentication [Host auth.]
Click the [Host auth.] tab on the “User mng.” page. (
®
Operating Instructions
135
15 Configure the settings relating to the authentication [User mng.]
Summary of Contents for WV-SFN310
Page 209: ...Operating Instructions 209 Notes ...