29
Installation
Camera mounting
Installation shall be conducted after turning off each device.
z
Detach the dome cover. (
☞
Page 17)
x
Connect the cables to the camera. (
☞
Pages 23 - 28)
As necessary, use a cable tie (accessory) to assemble the cables.
c
Mount the camera. (The illustration represents the case in which a two-gang junction box is
installed.)
Fix the camera with 4 screws (M4, locally procured).
Direction marker for installation
(
g
TOP)
Direction marker for installation
(FRONT
h
)
Two-gang junction box
Screws (locally procured)
46 mm {1-13/16 inches}
83.5 mm {3-9/32 inches}
IMPORTANT:
• When tightening the screws, be careful to ensure that the cables does not tangle the cables.
Note:
• For ceiling mounting
Select which direction to face the front (the side where the Panasonic logo and "FRONT
h
" are)
of the camera. Refer to the "Adjustment" section (
☞
pages 30 - 33) for further information
about adjustment.
• For wall mounting
The camera shall be mounted with the "
g
TOP" marker facing upward.
