14
Major operating controls
About the [INITIAL SET] button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for about 5 seconds or more without releasing this button. Wait about 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Do not turn off the power of the camera during the process of initialization. Before
initializing the settings, it is recommended to write down the settings in advance.
About the indicators inside the SD memory card slot cover
The Access indicator, Link indicator, and SD memory card error indicator inside the SD memory
card slot cover can be turned off. (Indicators are set to light or blink in the default settings.)
Turn off the indicators as required according to the installation environment. (
☞
Operating
Instructions (included in the CD-ROM))
Enclosure
Screw cover
Dome cover
* Do not touch the dome cover
with your bare hands.
Sub cover
SD memory card slot cover
<Inside view of the SD memory
card slot cover (with SD memory
card slot cover opened)>
INITIAL SET button
SD memory card slot
Access indicator
(blinks when accessing)
Link indicator
(lit when linking)
SD memory card
error indicator
Summary of Contents for WV-SF448
Page 39: ......
