manualshive.com logo in svg

Panasonic WV-S2250L, User Manual

Share
Download
Panasonic WV-S2250L User Manual Download Page 22

22

Insert / remove an SD memory card

【2】

 Attach the enclosure to the camera.

Note:

 

⿟

Refer to the Operating Instructions on the Panasonic support web site for further information 
about the SD memory card settings.

■

 Insert an SD memory card

SD memory card
(with label facing down)

【１】

 

Remove the enclosure from the camera, insert an SD memory card fully into the SD slot until a 

click is heard.

⿟

Insert the SD memory card with its label facing down.

⿟

Insert the SD memory card with its back end at the same height as the lower part of the 
center SD guide rib until it makes a clicking sound.

⿟

Take your fingers off the SD memory card and check that its back end does not protrude 
over the upper part of the SD guide rib.

⿟

After the SD memory card has been inserted, press the SD ON/OFF button, and make sure 
the SD MOUNT indicator is continually lit.
 

⿟

If you do not press the SD ON/OFF button after inserting the SD memory card, the SD 
MOUNT indicator is automatically lit approximately 5 minutes later.

Back end of the SD 
memory card

SD MOUNT indicator

SD guide rib

SD ON/OFF button

Summary of Contents for WV-S2250L

































Reviews:

No comments

Brands by name

Popular brands

Load more brands