manualshive.com logo in svg

Panasonic WV-S1132RF, Important Information Manual

Share
Download
Panasonic WV-S1132RF Important Information Manual Download Page 20

20

Slide cover

SD slot (SD) 

ALC lens connector

D

Lens (compatible)

C

SD MOUNT indicator

B

SD ON/OFF button  

A

Auto back focus button (ABF)

Data Matrix                : To our website

Depending on the scanning application used, the Data Matrix may not be able to be 
read correctly. In this case, access the site by directly entering the following URL. 
https://security.panasonic.com/support/qr_sp_select/

⑴

When the SD ON/OFF button is pressed (less than 1 second), the SD MOUNT indicator lights 

up in green and data can be saved to the SD memory card.

⑵

  When the SD ON/OFF button is held down (about 2 seconds), the SD MOUNT indicator lights 

off and the SD memory card can be removed.

B

SD ON/OFF button

A

Auto back focus button (ABF) 

Used when adjusting the focus. Refer to the Installation Guide for details.

Top side

■

Indicators and buttons (side)

【

Side

】

Summary of Contents for WV-S1132RF
































Reviews:

No comments

Brands by name

Popular brands

Load more brands