6
Step 2
When connection is performed without drilling
the wall for cable installation, cut off the notch
marked with a circle drawn with a dotted line
on the upper or lower case with a nipper for
cable installation.
Step 3
Remove the lower case of the main unit. The
case can be removed by pulling down it while
pressing the ribs (5 points) marked with arrows.
Upper case
Lower case
Step 1
Put the template (accessory) against the wall
and mark the positions of fixing screws (M4, to
be separately purchased) and the hole through
which the cables are laid.
If cables are routed inside the wall, bore a hole
through the wall.
Drill 4 holes on the wall to secure it with M4
screws. The hole diameter shall be decided in
accordance with the specifications of the
screws and anchors to be used. When the
cables are laid inside the wall, drill a hole
through the wall for cable installation.
83.5 mm
{3-9/32 inches}
46 mm
{1-13/16 inches}
Be sure to read “Precautions” and “Precautions for installation” before installation. Read the operat-
ing instructions for the camera to be installed as well.
Installation
