22
Adjusting picture quality (picture quality adjustment screen)
Click the [SETUP>>] button under "Image Adjust" on the [Image/ABF] tab. (
Settings relating to adjustment of image quality can be configured in a newly displayed window. When values
are changed, the changed values will be applied immediately to the image displayed on the [Image/ABF] tab.
(1/4)
No.
Item
Description
(1)
[Super Dynamic 3]
Default: ON
Select whether or not to turn Super Dynamic 3 on.
................................................................................................................
Note
• When lighting conditions cause flickering, changes in colour or noise,
set the shutter speed to "OFF".
.....................................................................................................................
ON
Super Dynamic 3 is turned on.
OFF
Super Dynamic 3 is turned off.
(2)
[Mask area]
When "OFF" is selected for [Super Dynamic 3], it is possible to
compensate for backlight by masking brighter areas in an image.
For further information about masking see page 26.
START
Start the mask area settings.
END
End the mask area settings.
RESET
Delete the set mask area.
(3)
[Shutter]
Default: AUTO
Select the speed of the electronic shutter. Flickering may not be
compensated even when "AUTO" is selected. When flickering appears
frequently, set the shutter speed to "1/100".
AUTO
The shutter speed is automatically adjusted to reduce flickering caused
by fluorescent lamps.
OFF
Fixed at 1/60 seconds.
1/100
Fixed at 1/100 seconds.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
